How To Winterize Sprinkler System

A quick and potent way to winterize an irrigation system is by blowing out excess water with an air compressor.

How to winterize sprinkler system. Find the sprinkler station highest and farther from the compressor and turn it on. Replacement Backflow Preventers httpamznto2f53GlySmall compressor for small yards httpamznto2f3Ycb4This not too hard anyone can do it. Turn the water supply off at the main water valve to prevent more water from entering the system.

Shut down the water supply and connect the air compressor to the irrigation system using the coupler. Make sure to shut it off at the main valve. Following the steps will help you get your sprinkler system ready for winter efficiently.

Avoid blowing compressed air directly through the backflow device. One of the most common methods to winterize your sprinkler system is the compressor air blow-out. The first thing to do as winters freezing temperatures are drawing near is to turn off the water to your sprinklers.

However if you have a sprinkler system you need to take steps to prepare it for the cold. Follow these steps to blow out an underground sprinkler system. The valves joints and fittings on your sprinkler system are sensitive to ice building up inside.

To completely remove water from the system a purge must be completed using compressed air. Your yard will thank you when you can still water the lawn next spring. This method uses an air compressor to clear water from your sprinkler system.

There are several ways to drain your pipes. It really depends on the size of the air compressor you use. Open all the drain valves for each zone and leave them open until all the remaining water drains from the pipes.