How To Winterize A Jet Ski

First open your drain plugs and remove all of the water within your hull.

How to winterize a jet ski. Wipe down the entire exterior focusing on the bottom of the jet ski where slime and algae usually build up. Now its time to drive the jet ski up onto the trailer. If you want you can also out some high shine wax to buff and shine.

Any water or fluids left in the engine are going to potentially freeze over the course of the winter. Just follow these steps and your jet ski will be ready for winter. Simply make a 5050.

The first step that needs to happen when winterizing a jet ski is the draining of the jet ski. To winterize a jet ski you need to take three important steps. Rinse your jet ski well and then let the jet ski completely air dry.

Before the temperature falls below 25 degree Fahrenheit its better you winterize your jet ski. The process is fairly straightforward. How to Winterize a Jet Ski.

To winterize a jet ski that wont start first remove the spark plugs and spray fogging oil. To winterize a jet ski start by removing it from the water and making sure the stern is higher than the bow so it can be drained. Wash down the outside of the jet ski with soap for a couple of minutes and turn off the tap.

Back up the car until the trailer is fully submerged in the water. There is water in the cooling system which needs to be emptied entirely. Dry your craft with a soft towel or cloth or let it dry naturally in the sun for a few minutes.