How To Make A Fire With Sticks

Place Dry Grass and Leaves on the Kindling.

How to make a fire with sticks. Remember to leave a little gap in the teepee so you can light the tinder. Basically you are holding a stick upright with your palms facing each other spread flat while rotating the stick and pressing downward with the stick to create greater friction to generate enough heat for an ember to form at the base of the stick. The twigs and sticks are the kindling for the fire.

Create a fire plough for a makeshift fire starter. Brace the first branch with rocks so that it doesnt roll around then sit near the end of it. Cast away on a deserted island.

To start a fire with sticks begin by gathering tinder like dried leaves and mosses and shaping it into a nest. Place your fire starter in the middle of the ring Stick a sick into the ground and lean others around it and the fire starter once you have built the tepee with kindiling and tinder keep adding tinder to the fire until you have a nice bed of coals and then you can add fuel. Place a stick in the notch and rub your palms together around it to roll it and create friction.

Make sure all your wood is dry. Place the spindle on the piece of wood which you will make the ember on and place a piece of small wood on top of the spindle for stabilization. Place the tip of the stick into the groove you carved in the branch then begin to rub it back and forth through the channel.

Dig a groove into a flat piece of softwood with a pocket knife or another sharp tool. Then place a piece of bark beneath this notch to catch the embers. After a few minutes the heat will intensify and ignite the wood particles created by the ploughing motion.

The dry grass and leaves act as tinder for the fire. The items you will need for making these AMAZING fire starters are. Then find a piece of soft wood about 3 inches wide and 12 inches long and cut a hole in it with a knife.